JIH-E Type 3 Axes CNC Machining Center

JIH-E Type 3 Axes CNC Machining Center

Products Description
Machine Features

  • Choice of X-axis travels: 3,500/4,500/5,500/6,500mm.
  • Table type: vise
  • ISO 30 spindle
  • Spindle speed: 18,000 RPM (standard),
    24,000 RPM (optional).
  • 8-tools disk type magazine.
  • Travelling column design features increased machining efficiency and accuracy.
  • Three axes are equipped with high precision linear guide ways.
  • X-axis ball screw is directly coupled with servo motor.
  • Syntec controllers-PC-based, Mitsubishi, Fanuc and Siemens)

Automatic Tool Changer

  • Armless type automatic tool change.
  • 8-tools disk type magazine.
  • Accommodates ISO 30 tools.
  • Tool selection metho is bi-directional and random providing fast tool change and smooth motions.


Model 6500E 3500E
LxWxH 8,500×1,500×2,250mm 5,500×1,500×2,250mm
Table 6,500x300mm 3,500x300mm

Applicable Materials

  • Aluminum
  • Plastic
  • Other non-ferrous metals

Applicable Industries

  • Aluminum door and windows
  • Curtain Wall (glass wall)
  • Extruded aluminum
Standard Equipment
Advanced CNC Controller
SINTEC controller Mitsubishi controller Fanuc controller
PC-Base CNC Controller

  • Machines are equipped with Syntec PC-Base CNC controller, featuring easy to leam and easy to operate.
  • Mitsubishi, Fanuc or Siemens controller is optional.
PNEUMATIC COUNTER BALANCE ON Z-AXIS

  • The Z-axis movement is counter-balanced by using an air cylinder, allowing the Z-axis to move more smoothly.
  • The counter balance system is equipped with ang accumulator to supply stable air flow at all times.

PLANETARY GEAR REDUCER

  • Syntec controller
  • 24 ATC unit
  • Oil mist cooling system
  • Spindle air blast
  • Automatic lubrication system for linear guideways
  • Leveling kit and tool box
  • Telescopic cover for guideways
  • Wire switch for emergency stop
  • Pilot lamp
Spindle cooler Heat exhanger for electrical cabinet Chain type chip conveyor
SOPHISTICATED LASER INSPECTION
After each machine has been assembled, our experienced personnel applies a sophisticated laser intrument to inspect and calibrate ball screw pitch error and backlash, positioning accuracy, as well as repeatability on the X, Y and Z-axes. Through the laser inspection process, we can guarantee high feed accuracy on three axes as well as overall machining accuracy.
BALL BAR TEST
To assure the highest structral mechanical assembly accuracy, and to eliminate the reverse spike phenomenon, all Bar tested during the assembly processes. The test will calibrate the machine to the optimum status, thus extend the life time of axial ball screw and slideways.

Products Specification

Model JIH-CNC6500E
STROKE
X-Axis Stroke 3,500/4,500/5,500/6,500 mm(Opt.)
Y-Axis Stroke 300 mm
Z-Axis Stroke 200 mm
Distance from spindle nose to table surface Min. 150 mm, Max. 350 mm
TABLE
Table Type vise(Opt.)
Table Size 300 x 3,500~6,500 mm
T-Slot(NO.xPitchxSize) 850 mm
SPINDLE
Spindle Speed 18,000 R.P.M.(Opt. 24,000 R.P.M.)
Spindle Motor 7.5 kw (Opt.9 kw)
Spindle Taper Cone ISO 30
FEED RATE
Rapid Rraverse (X/Y/Z) X:60 m/min, Y:24 m/min, Z:24 m/min
Servo Motors 3 Axes X:1.5kw, Y:1kw, Z:1kw
Cutting Feed Rate F:1~5000 mm/min
ATC
Magazine Capacity 8 Tools
Toold Holder ISO 30
Max. Tool Diameter 50mm
DIMENSIONS
Machine Weight 3,500~5,500 kgs
Machine Dimensions 5,500~8,500 x 1,500 x 2,250 mm
Packing Dimensions 5,700~8,700 x 1,700 x 2,400 mm
Required pneumatic pressure 6 kgs/cm2

*We reserve the rights to modify above specification without notice.