JIH-12 – Double Blade Angular Sawing Machine Series

Products Description
  1. When the foot panel switch is pressed the machine will perform material clamping and cutting automatically
  2. Cutting feed is driven by an air/hydraulic combination power for smooth feed speed.
  3. Vertical and horizontal workpiece clamping design ensures extremely firm for any type of aluminum workpiece
  4. Work piece clamping pressure is adjustable to eliminate material deformation problem.
  5. Automatic oil mist colling for sawblades provides burr-free surface of cut, while extending sawblade life.
  6. Alternatively sawblades straight feed in horizontal direction allows large cutting width.
  7. Equipped with wear-resistant linear motion guides for accurate angle of cut.
  8. Allows for right or left cutting individually.
  9. Right and left cutting alternatively fully eliminates waste of workpie.ce.
  10. Cutting angle is easy to adjust.
  11. Gap between gauge and sawblade is adjustable no burr after sawing.
  12. Both side of the machine are equipped with a 2.4m infeed and a 2.4m outfeed conveyor table for convenient repetitive.
  13. The machine performs a 45 degrees miter cut. Designed for high speed cutting of extrudes strip, door and window frames.

Products Specification
OPTIONAL:•Infeed,Outfeed Roller Table•With Auto3000 Do Automatic Positioning,Automatic Feeding(Pushing),Automatic Cutting•Saw Blade

Model JIH-12
Cutting Angle 45°
Capacity(HxW)Mm 90 x 140 mm
Saw Blade Sizes 12″ x Ø1″ x 2pcs
Spindle Speed 3,200 R.P.M.
Motor 2 HP x 2
Clamping Way 4 ( Vertical clamps & Horizontal clamps )
Table Area 1,160 X 150 mm
Table Height From Floor 840 mm
Infeed Outfeed / Conveyor Length 2,400 mm
Net/Gross weight 360 / 460 kgs
Air Pressure 4-6kgs / cm2
Machine Dim. (LxWxH) 1,500 x 880 x 1,150 mm
Packing Dim. (LxWxH) 1,620 x 1,000×1,350 mm

*We reserve the rights to modify above specification without notice.