Products Description
JIH-NC24L/NC30L Sawblade Feed Way Diagram.
Specially designed cutting way:After the sawblade moves forward for
cutting,table moves to right and left for retracting 2 mm.Then the
sawblade return to its home position.This special design may avoid
return-cutting,while ensuring fine surface of cut and cutting accuracy.
Features
- Automation feed, positioning. oil splashing and sawing.
- Feed stroke 1,250mm/2,500mm/6,000mm. (Repeat cycle feed stroke no limit for length).
- Horizontal cutting and saw move on linear guide way, that assure accurance and large cutting.
- Employ touch sensing screen for maximun operation convenience. The controller.Features self-diagnostic function which is displayed on the screen for convenient troubleshooting.
- Feed is driven by hydraulic system, providing maximum stability of cutting.
- Two sets each of vertical clamps and horizontal clamps provided on the feeding system permits cutting of irregular work piece.
- 100 sets of size memory capacity. Each set allows for setting 12 sizes.
- The computer automatically records required time and quantity for each machining, providing convenient calculation of machining cost.
- During operation, the machine provides detection for lack of material. Available to set remain material.
- Feed models : 1. Stepping feed. 2. Repeat cycle feed. 3. Manual feed
 |
The clamps on the feed tale are suited for cutting irregular stock without need of additional fixtures to fix the workpiece. |
 |
Auxiliary support prevents workpiece deflection. |
 |
Transmission Device Employs precision ground rack with accuracy up to 0.02mm ( suitable for 3 and 6 meter feed travel ) |
 |
Vacuum Oil Mist Unit
The vacuum oil mist unit employs vacuum generation principle to transfrom cutting fluid into oil mist for spraying. It provides lubrication and cooling functions, ensuring no dust deposit and sawblade, high cutting accuracy and long service life of sawblad. |
Products Specification
Suitable For Cutting Various Materials
Aluminum, Brass, heat sink, PVC, plastic steel, Bakelite, acrylic
plastic, Teflon, honeycomb board, wood and other non-ferrous
metals.
Standard Accessories
20” sawblade x 1pcs ( or specified size is available ) 、tool
box、Horizontal clamps of worktable
Optional:•CE Standard•Infeed,Outfeed Roller Table•Chip Collector•Hydraulic Clamping•Saw Blade
| Model | JIH-NC24L TYPE(Original Model For JIH-455L) | JIH-NC30L TYPE |
|---|---|---|
| Servo Drive System | Ball screw (or hight precision gear rack) | Ball screw (or hight precision gear rack) |
| Cutting Capacity ( H x W ) | 200 x200, 175 x210, 130 x350, 40x400mm(Check cutting capacity chart) | 250 x250, 210 x400, 180 x500mm(Check cutting capacity chart) |
| Max. Feed Distance(one cycle) | 1,250mm ( 2,500 / 6,000mm opt. ) Unlimited recycle feed distance | 1,250mm ( 2,500 / 6,000mm opt. ) Unlimited recycle feed distance |
| Automatic Feed Accuracy | ±0.1mm | material small than 150 x 300, Accuracy ±0.1mm, material bigger than 150 x 300, Accuracy ±0.15mm |
| Saw Spindle Speed | 1,500 –
3,500R.P.M . (Depends on sawblade size to set) |
1,000 – 3,000R.P.M . |
| Saw Spindle Motor | 15 HP / 4P | 15 HP / 4P |
| Inverter Motor | 15 HP | 20 HP |
| Hydraulic Feed Motor | 2 HP | 2 HP |
| Servo Motor | 1kw (1.5kw opt.) | 2kw |
| Table Height From Floor | 900 mm | 1,010 mm |
| Touch-Sensing Screen | 7″ | 7″ |
| Saw Blade Size | Choice of 12″~24″(1″ bore) | 24″~30″(50mm bore) |
| Air Pressure | 4 – 6kgs / cm² | 4 – 6kgs / cm² |
| Max. Load | 100kgs | 200kgs |
| Machine Diamesions (L x M x H) | 3,500 x 2,100 x 1,860 mm | 3,900 x 2,290 x 1,940 mm |
| Packing Diamesions (L x M x H) | 3,620 x 2,220 x 2,000 mm | 4,120 x 2,390 x 2,140 mm |
| Machine Weight | 2,300kgs | 2,800kgs |
| Packing Weight | 2,700kgs | 3,100kgs |
*We reserve the rights to modify above specification without notice.
