JIH-18 P Type – Sawing Machine


Products Description
Feedrate

    • To operate the machine, simply treadle on the foot switch, the machine will automatically perform clamping and cutting for convenient operation.
    • Concealed sawblade performs upward cutting. Single or multiple workpieces can be cut simultaneously.
    • While cutting, the oil mist splashes automatically for cooling and lubrication.
    • Cutting feed is driven by a air/hydraulic combination cylinder for extremely stable cutting speed.
    • The machine cabinet painting is baked by high temperature of 200 degree (Powder coating) for resisting bumping without paint peeling off.
    • The machine permits 90 and 45 degree cutting.

Specially deigned cutting motion

  • After the sawblade moves upward for cutting, table moves to right and left for retracting 2mm, then the sawblade lower to it’s home position. This special design may avoid return-cutting. while ensuring fine surface of cut and cutting accuracy.
  • Two sets of hold down clamps on the worktable make the machine able to compact clamp the material, which is more suitable for cutting irregular stock. This design allows for independent adjustment of clamping speed and clamping pressure.

  1. Adjustable clamping speed.
  2. Adjustable cutting height.
  3. Adjustable cutting speed. The operator may adjust clamping height and speed a cutting height and speed according to work piece size and thickness for saving wait time.
VACUUM OIL MIST UNIT
The vacuum oil mist unit employs vacuum generation principle to transform cutting fluid into oil mist for splashing. It provides lubrication and cooling functions, ensuring no dust deposit and sawblade, high cutting accuracy and long service life of sawblad.
  1. The convenient door for saw blade replacing. Open the side door to replace the blade. The door can load the whole blade and there won’t be any inconvenience for the blade installation as those Atyped machine
  2. CHIP OUTLET PORT The chips are exhausted through this outlet port. It eliminates inconvenient cleaning for those chip deposited in the machine.
The sawblade spindle is heat treated and plated for greatly increasing the spindle life

Products Specification

Optional:•CE Standard•Infeed,Outfeed Roller Table•Chip Collector•Horizontal Clamp•Horizontal Clamp•Hydraulic Feeding

•With Auto3000 Do Automatic Positioning,Automatic Feeding(Push),Automatic Cutting•Saw Blade

*We reserve the rights to modify above specification without notice.

MODEL JIH-18 P Type
Cutting Angle 90° or 45°
Cutting Capacity(HxW) 110 x 110, 100 x 180
60 x 230, 20 x 240 mm
Spindle Speed 3,200 R.P.M.
Sawblade Sizes 18″ x 1″ bore
Table Area 1,350 x 380 mm
Table Height From Floor 875 mm
Motor 7 1/2 HP(10HP opt.)
Air Pressure 4 – 6 kgs/cm2
Conveyor Length (Opt.) 1 – 7 M
Machine Diamesions
( LxWxH )		 1,500 x 840 x 1,460 mm
Packing Diamesions
( LxWxH )		 1,620 x 960 x 1,660 mm
Net/Gross Weight 600 / 750 kgs