Orbital flying cut-off on tube mills
KINS‘ ORANGE OrbitalMaster Pro TCT saw blades set the new standard for orbital flying cut-off applications on tube mills. This saw blade delivers even greater results due to an optimized tooth geometry and a new high-performance PVD coating.
Higher cutting speeds & increased output
Thanks to its fracture-resistant carbide tips protected by a cutting-edge PVD coating, the KINS' ORANGE OrbitalMaster Pro supports higher cutting speeds, shorter cycle times, and increased output while maintaining consistent cutting performance and long blade life.
Ensure high line speed
KINS' ORANGE OrbitalMaster Pro has proven itself thoroughly across a wide range of applications. A robust product that has demonstrated its effectiveness under the most challenging conditions. This translates to an extended blade life, consistent performance, high line speeds, and cuts. It is perfectly fit for orbital cutting of large-sized materials in all shapes and wall thicknesses (up to S700 X80, HT), profiles and tubes.
With suggested cutting speeds of 280-400 m/min and a tooth load of 0.04 - 0.16 mm/tooth, the OrbitalMaster Pro allows exploiting the capabilities of all types of orbital cut-off machines. Find our standard sizes, suitable saws, and sawing parameters below. Our experts are happy to support you with choosing the right saw blade for you and demonstrate the performance in your tube mill.
PARAMETER EXAMPLE Orbital cutting
- Tube-entry 0.03 up to 0.06 mm/tooth
- Orbital feed: 0.10 up to 0.30 mm/tooth
Advantages of the KINS' ORANGE OrbitalMaster Pro
- Short cutting time
- Excels at cutting tubes & profiles
- Improved tip and gullet design, upgrade PVD coating
- Cuts high tensile materials (up to S700MC, S355J2H, X80)
- Milled-like cut surface
APPLICATIONS For KINS' ORANGE ORBITALMASTER Pro
Perfect for large sizes of all shapes in combination of all wall-thicknesses (up to X80, HT) and tubes with suggested cutting speeds of 280-400 m/min and a tooth load ranging from 0.04 - 0.16 mm/tooth. Optimal for a range of cutting applications including profiles, pipes and tubes, structural tubes, and foundation pipes.
- Cutting tubes and profiles on orbital flying-cut-off applications
- Suggested cutting speed: 280 – 400 m/min
- Tooth load ranging from: 0.04 - 0.16 mm/tooth
- KINS' ORANGE OrbitalMaster saw blades are available for all types of orbital cutting machines, such as ADDA-FER, ASMAG-SEUTHE, CONTOR, Danieli, Danobat, Elmaksan, ERWT, Fimi, FIves OTO, Kusakabe, Linsinger, MTM, Nakata, Olimpia80, and SMS Meer.
TYPICAL STEEL GRADES FOR KINS' ORANGE ORBITALMaster Pro
- Low carbon steel
- High carbon steel
- Boron steel
- Low-alloy high-strength steel
TYPICAL MACHINES
| Manufacturer | Machine type |
| Fives OTO Mills | TOAC series |
| Nakata | RFS series |
| Kusakabe | RD series |
| Linsinger | MC series |
| SMS Meer | PTO, PTA |
| Elmaksan | ELBM series |
| Danieli | DP0 series |
| Adda Fer FIMI Group | DB series |
| MTM | A206, A208 |
STANDARD Range KINS' ORANGE OrbitalMaster Pro
| Diameter (mm) | Kerf (mm) | No. of teeth (Z) |
| 250 | 3,7/3,0 | 46 |
| 250 | 3,2/2,5 | 60 |
| 300 | 3,7/3,0 | 52 |
| 300 | 3,2/2,5 | 72 |
| 300 | 3,2/2,5 | 72 |
| 315 | 3,2/2,5 | 70 |
| 320 | 3,7/3,0 | 60 |
| 320 | 3,7/3,0 | 60 |
| 320 | 3,2/2,5 | 60 |
| 320 | 3,2/2,5 | 80 |
| 320 | 3,2/2,5 | 80 |
| 320 | 3,2/2,5 | 80 |
| 350 | 4.3/3.2 | 52 |
| 350 | 4.3/3.2 | 52 |
| 350 | 3.7/3.0 | 64 |
| 350 | 3.7/3.0 | 64 |
| 350 | 3.2/2.5 | 72 |
| 350 | 3.2/2.5 | 84 |
| 350 | 3.2/2.5 | 84 |
| 355 | 4.3/3.2 | 52 |
| 355 | 3.7/3.0 | 64 |
| 355 | 3.7/3.0 | 64 |
| 355 | 3.2/2.5 | 72 |
| 355 | 3.2/2.5 | 72 |
| 355 | 3.2/2.5 | 72 |
| 355 | 3.2/2.5 | 84 |
| 355 | 3.2/2.5 | 84 |
| 355 | 3.2/2.5 | 84 |
| 380 | 4,3/3,2 | 54 |
| 380 | 4,3/3,2 | 66 |
| 380 | 4,3/3,2 | 66 |
| 380 | 3,7/3,0 | 66 |
| 380 | 3,7/3,0 | 66 |
| 380 | 3,7/3,0 | 66 |
| 380 | 3,2/2,5 | 90 |
| 380 | 3,2/2,5 | 90 |
| 380 | 3,2/2,5 | 90 |
| 400 | 4,3/3,2 | 60 |
| 400 | 3,7/3,0 | 72 |
| 400 | 3,2/2,5 | 100 |
| 400 | 3,2/2,5 | 100 |
| 450 | 3,2/2,5 | 110 |
KINS' ORANGE OrbitalMaster Pro is a new saw blade.
