Cutting Excellence of solids
Crafted to handle the most resilient solid materials, KINS' RED HT effortlessly slices through tough solid carbon steel, boasting a tensile strength exceeding 900 N/mm² on cutting machines. But there's more – this adaptable saw blade for solids is also the preferred option for cutting ferritic, martensitic, and duplex stainless steel bars exceeding a diameter of 35 mm. Featuring dedicated tooth geometries and a PVD coating, it ensures optimal blade longevity when cutting high-tensile carbon steel, all the while sustaining high productivity levels.
Upgrade your cutting experience
This saw blade sets a new standard in accuracy, durability, and cutting performance. The KINS' RED HT enables high production volumes for high tensile strength applications and enables replacement of band saw machines by stationary automatic circular sawing machines. With recommended cutting speeds of 60 to 140 meters per minute and a tooth load of 0.05 to 0.09 mm per tooth, KINS' RED HT ensures smooth operation and reliable performance throughout the cutting process. This saw blade seamlessly fits all major brands of stationary automatic sawing machines, including Nishijimax, Kasto, Exactcut, Tsune, Mega, Everising, Rattunde, Behringer, and more.
Benefits of KINS' RED HT
- New saw body design
- New dedicated tooth geometries
- New type of coating
- Best blade life performances when cutting high tensile carbon steel
- High productivity when cutting stainless steel
Applications and parameters
- Hard solid carbon steel with a tensile strength higher than 900 N/mm2 and ferritic, martensitic and duplex stainless steel bars Ø >35 mm on high-performance machines
- Suggested cutting speed: 60 – 140 m/min.
- Tooth load ranging from 0.05 – 0.09 mm/tooth
KIN'S RED HT boasts versatility
KIN'S RED HT is tailored for high tensile solid materials, as well as ferritic, martensitic, and duplex stainless steel bars with a diameter of > 35 mm. It performs seamlessly with cutting speeds between 60 - 140 m/min, applying tooth loads from 0.05 - 0.09 mm/tooth. Common applications include:
- Leaf suspensions
- Drive shafts
- Torsion bars
- Special forging
- Parts for machining
Typical steel grades
- Ferritic stainless
- Martensitic stainless
- Duplex
- Chrome Steel
- Springsteel
- High tensile
- Hardened boron steels
TYPICAL MACHINES
| Manufacturer | Machine type |
| Amada | CM(B) series |
| Noritake | NCS-series |
| Behringer / Eisele | HCS-series |
| Mega | CS-series |
| Wagner / Trennjäger | SPA-series |
| Kasto | C-series |
| Everising | P-series |
| Nishisimax | NHC-series |
| Ficep | S-series |
| Tsune | TJ/TK-series |
| Exactcut | TAC series |
| Danobat / Plantool | VCS/QCS series |
STANDARD Range KINS' RED HT
| Diameter (mm) | Kerf (mm) | No. of teeth (Z) |
| 250 | 2,0 / 1,7 | 60 / 72 / 80 / 100 |
| 285 | 2,0 / 1,7 | 60 / 72 / 100 / 120 |
| 315 | 2,4 / 2,0 2,6 / 2,25 | 60 |
| 315 | 2,3 / 2,0 2,5 / 2,25 | 72 / 80 |
| 315 | 2,3 / 2,0 | 100 / 120 |
| 350 | 2,8 / 2,5 | 60 |
| 350 | 2,7 / 2,5 | 80 / 100 / 120 |
| 360 | 2,6 / 2,25 | 60 |
| 360 | 2,5 / 2,25 | 80 / 100 / 120 / 140 |
| 370 | 2,4 / 2,0 | 60 |
| 370 | 2,3 / 2,0 | 80 / 100 / 120 |
| 380 | 2,6 / 2,25 | 60 |
| 380 | 2,5 / 2,25 | 80 / 100 / 120 |
| 400 | 2,7 / 2,5 | 60 / 80 / 100 |
| 420 | 2,7 / 2,25 | 50 / 60 / 80 / 100 |
| 425 | 2,7 / 2,25 | 50 / 60 / 80 / 100 |
| 460 | 2,8 / 2,25 | 50 |
| 460 | 2,7 / 2,25 | 60 / 80 / 100 / 120 |
| 480 | 2,7 / 2,25 | 50 / 60 / 80 / 100 |
| 500 | 3,5 / 3,0 | 80 |
| 520 | 3,8 / 3,2 | 50 |
| 520 | 3,0 / 2,5 | 72 / 80 |
| 560 | 3,8 / 3,2 | 60 |
| 560 | 3,0 / 2,5 | 72 / 80 |
| 560 | 3,7 / 3,2 | 100 |
| 560 | 3,0 / 2,5 | 120 |
| 580 | 3,2 / 2,7 | 60 / 72 / 80 / 100 |
| 630 | 3,2 / 2,7 | 60 / 72 / 80 / 100 |
| 650 | 3,7 / 3,2 | 80 / 130 |
| 750 | 3,8 / 3,2 | 60 / 72 / 80 / 100 |
KINS' RED HT is formerly known as: CX1H
