SPM For Turning / Copy Lathe Machine
These machines are available with or without Hydraulic Copying System. Machines are suitable for job where simultaneous Facing and OD Turning or OD Turning and lD Turning or Facing and lD Turning required excluding holding portion. Mostly these machines are used on Tie Rod Housing, Gear Blanks, Sprockets, and Bearings etc. Machines are suitable for mass production of items economically. Machines are highly productive with ease in operation and maintenance.
A VAILABLE OPTIONS:
- Machine having Hydraulic Copying System mounted on Hydraulic Longitudinal Slide on Left and Right side of Spindle Face. This machine is suitable for copying operation on Face and OD or Face and lD or OD and lD. Both copying system are having double cut facility.
- Machine having one Hydraulic Copying System and one Compound Hydraulic Slide. This machine is suitable for job where copying operation required on either OD or lD or Face and straight turning operation required on face or lD or OD along with copying operation.
- Machine having two Compound Hydraulic Slide suitable for job where no copying operation required. Machines are suitable for straight turning operation on OD and Face or OD and lD or lD and Face. One element of slide is for tool relieving.
SPECIFICATION:
| Head Stock Motor | 3 to 10 H.P. depending on requirement. |
| Power Pack Motor | 1.5 to 3 H.P. depending on requirement. |
| Max. Job Dia | 150mm (Optional bigger diameter against special request) |
| Max. Job Length | 100mm |
| Spindle RPM | 500
to 3000 (Fixed as per requirement; Optional Variable AC Drive can be offered) |